Starting in April 2024, all firmware updates will be automatically reported by Home Assistant. If you need to perform a manual firmware update, please refer to the guide below.
This article presents a guide detailing the process for executing an Over-The-Air update of Shelly Wave devices through Home Assistant, utilising the Z-Wave JS UI add-on.
- Open the HA Menu by selecting the Menu icon located in the top left corner.
- Within the HA Menu, choose the option "Open Z-Wave JS".
- Once the user interface (UI) has loaded, proceed to select the icon corresponding to the desired Device for the OTA.
- Click on the Advanced button
- Within the Advanced window, locate the Firmware update option and then proceed by pressing BEGIN.
- Choose the line corresponding to the Firmware file, and navigate to the location of the downloaded file on your device. Ensure the Target to update is set to 0 and press OK.
- After completing the previous step, you can navigate back to the Z-Wave JS UI, where you will be able to monitor the update's progress.
- After the update is completed, you will receive a notification.
- Following which HA will conduct the device interview again.
- Upon completion of the interview, the new firmware version will become visible in the widget of the updated device.