This guide walks you through how to set up your Shelly Matter-compatible devices (Shelly 1 Gen 3, Shelly 1PM Gen 3, Shelly 2PM Gen 3,Shelly Mini 1 Gen 3, Shelly Mini 1PM Gen 3 / Gen 4) with the Apple Home app.
NB: Matter hub is required. We do not offer Matter hubs.
Steps to Connect Your Shelly Matter Device
1. Open Apple Home App
- Make sure that your phone is connected to the same Wi-Fi where matter hub is added
- Launch the Apple Home app on your iPhone or iPad.
- Tap on the + button in the top right corner.
- Select Add Accessory from the options.
2. Scan the QR Code
- Locate the Matter QR Code on the device packaging (for GEN 4 devices, it's on the box and an included sticker can be attached to the device itself).
- Alternatively, you can find the QR Code via the device's WebUI:
- Navigate to the Matter tab in the WebUI.
- Retrieve the QR Code from there.
- Use your phone's camera to scan the QR Code and proceed.
3. Follow HomeKit Setup Steps
Once the QR code is scanned, follow the standard Apple HomeKit setup process:
- Select the home where the device will be included.
- Assign a room for the device.
- Set up a name for easy identification.
- Define the appliance type (e.g., light, switch, plug, etc.).
- Complete the setup process as guided by HomeKit.
4. Finalize the Setup
- Your Shelly Matter device will now be connected and available in Apple Home.
- You can now control and automate the device within the Home app or via Shelly Smart Control.
Your device is now successfully connected and ready to use!